Specification:
- High metal removal rate
- Excellent arc stability
- Low electrical resistant
- Uniform diameter
- Suitable for gouging on Steel, Stainless steel, Cast iron and Copper.
Linkweld Carbon Gouging Copper Coated Electrode
Related products
Welding Consumables
Characteristics: LSF-38 is an active flux. It is designed for butt or fillet welding on sheet metal with nice bead appearance, porosity resistance and good slag removal. It is recommended for single pass welding steel plate under 25 mm thick. Applications: Typical applications include pressure vessels, H beam, pipe-mill application, shipbuilding and general steel structure.
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties of
Welding Consumables
Characteristics: LFC-711 is a flux-cored wire design to be use with CO2 gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm2 high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection. Applications: It is widely used
Welding Consumables
คุณสมบัติ It is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. LKT-50 is an all-position welding rod for TIG welding. It is especially suitable for the root pass of pipe welding. Use DC(-) polarity. Applications: It is suitable for welding of high pressure piping for shipbuilding,
Welding Consumables
Characteristics: LKE-7016 is a low hydrogen type electrode for the welding of high tensile steel. The welding can be done with stable arc, less spatters, good slag removability, good slag covering and good X-ray soundness. Applications: It is suitable for low alloy steels, medium carbon steels, heavy steel plates, cast steels and steels of poor
Welding Consumables
Linkweld stainless steel cleaner is a gel-type chemical applied with a brush to descale the heavy weld. It removes discolorations heat welding area caused due to heat evolution during welding. Can clean 90 – 100 meters of weld seams in 1 kg of gel Properties – easily use – descale from welding – remove discolorations
