Flux for Submerged arc welding
Related products
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a magnesium-alloyed aluminum. With good corrosion resistance when exposed to salt water. It is suitable for welding base metals 5050, 5052, 5083, 5356, 5454 and 5456. Classification: AWS A5.10 ER5356 Typical chemical composition of weld metal (wt%) Si Mn Mg Fe Al < 0.2 0.15 5.0 < 0.20
Welding Consumables
Characteristics: The weld metal of LKE-312 is a 29%Cr-9Ni% type stainless steel containing large content of ferrite which made it good crack resistance. Applications: It is excellent for the welding of dissimilar metals, cladding steel and steels with high hardenability. Notes on Usage: 1.Dry the electrodes at 200-250 °C for 60 minutes and keep at
Welding Consumables
Characteristics: LKT-347 is a niobium-bearing rutile electrode for Ti and Nb stabilized 18Cr-8Ni steels. Good intergranular corrosion resistance and heat resistance can be obtained due to its Nb content.It is use for AISI 347, 321, 304L steels. Applications: It is suitable for welding of stainless steel piping, boiler and gas turbine. Notes on Usage: 1.Dry
Welding Consumables
Characteristics: The weld metal of LKE-309L contains more Cr, Ni than LKE-308L. The microstructure containing suitable quantity of ferrite, gives it an excellent resistance to hot cracking. It is suitable for welding of dissimilar metals, hardening alloy steel and steel with poor weldability. Applications: It is suitable for welding of stainless steel piping in refineries
Welding Consumables
Linkweld stainless steel cleaner is a gel-type chemical applied with a brush to descale the heavy weld. It removes discolorations heat welding area caused due to heat evolution during welding. Can clean 90 – 100 meters of weld seams in 1 kg of gel Properties – easily use – descale from welding – remove discolorations
Welding Consumables
Characteristics: Heat resistance, corrosion resistance and toughness of LKE-310 are good. The weld metal is a full austenite structure containing 25%Cr-20%Ni. It is not necessary to preheat and postweld heat treatment. Applications: It is suitable for the welding of dissimilar metals, low-temperature service stainless steel, mild steel and Cr-Mo steel. Notes on Usage: 1.Dry the
Welding Consumables
Characteristics: LKE-309MoL is a rutile electrode use as a buffer layer in welding acid resisting clad steels. With crack resistance and corrosion resistance at the high temperature due to higher Mo content. Applications: It is suitable for dissimilar metal welding of joining mild steel to stainless steel and steels difficult to weld. Notes on Usage:
