Flux Cored Stainless Wires LFC-309L E309LT1-1

Characteristics:

LFC-309L is designed for 100% CO2 gas and all-position welding. It performs with smooth arc transfer, low spatter level, fast freezing slag and good hot crack resistance

Applications:

It is suitable for welding dissimilar alloys in wrought or cast forms, or used in dissimilar welding such as low alloy steel, heat resistance steel and clad steel

Notes on Usage:

1. Use 100% CO2 shielding gas.
2. Use DC(+) polarity.
3. Keep dry while in storage and delivery.
4. Trailer Shield is required to ensure the weld pool completely shield until solidification is complete and no porosity problem.

Classification:

AWS A5.22 E309LT1-1

EN EN12073 T 23 12 L P C 1

JIS Z3323 TS309L-FC1

Welding Position:

Typical chemical composition of weld metal (wt%)

C	Mn	Si	P	S	Ni	Cr	Cu	Mo
0.029	1.63	0.56	0.025	0.008	9.93	19.50	0.08	0.06

Typical mechanical properties of weld metal

TS N/mm2	EL %
565	40

Sizes and recommended current range ( DC+)

Diameter (mm)	1.2 mm
Welding Position	F, HF	H	V-UP	OH
Voltage (Volt)	24-33	25-29	24-28	25-29
Current (Amp)	130-220	140-180	130-160	150-180
Stick out (mm)	15-20	15-20	15-20	15-20
Flow rate (l/min)	20-25	20-25	20-25	20-25
Weight per spool (kg)	12.5	12.5	12.5	12.5