Welding Tungsten Electrodes
Related products
Welding Consumables
Super Welding Crack Checker Liquid penetrant test is one of the most popular Nondestructive testing (NDT) methods in the industry. When compare with to other NDT methods. This methods is economical, versatile, and requires minimal training, Liquid penetrant test check for material flaws open to the surface This fluid(Penetrant) seeps into any defects such as
Welding Consumables
Characteristics: LKE-309MoL is a rutile electrode use as a buffer layer in welding acid resisting clad steels. With crack resistance and corrosion resistance at the high temperature due to higher Mo content. Applications: It is suitable for dissimilar metal welding of joining mild steel to stainless steel and steels difficult to weld. Notes on Usage:
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties of
Welding Consumables
Characteristics: LKE-318 is a modified 316 stainless steel which contains Nb. Good corrosion resistance to sulfuric acid and organic acid can be obtained due to its Mo and Nb content. Applications: It is suitable for welding of chemical vessels, pipe line and steel plate of AISI 316Ti/SUS 316-Ti. Notes on Usage: 1.Dry the electrodes at
Welding Consumables
Characteristics: LKE-6013 is designed for high efficiency welding. Because of its thin flux coating the welding can be done with good slag removability, shallow penetration, less spatters and beautiful bead. Applications: It is suitable for welding of vehicles, steel sheets and other light structures. Notes on Usage: 1. Don’t exceed the range of proper current
Welding Consumables
Characteristics: The weld metal of LKE-308L is a rutile electrode for welding low carbon 18Cr-8Ni stainless steel. LKE-308L contains low carbon to avoid carbide precipitation during welding. Applications: It is suitable for welding of stainless steel piping in refinery, oil and gas industries, and chemical plants. Notes on Usage: 1.Dry the electrodes at 200-250°C for
Welding Consumables
Characteristics: The weld metal of LKE-316L is a 18%Cr-12%Ni-2%Mo.It possesses properties to LKE-316 except with a much lower carbon content which reduces susceptibility to sensitization during welding. Applications: It is suitable for welding of AISI 316,316L and cladding stainless steel. Notes on Usage: 1.Dry the electrodes at 200-250°C for 60 minutes and keep at 100-150°C
