Welding Tungsten Electrodes
Related products
Welding Consumables
Characteristics: LFC-711 is a flux-cored wire design to be use with CO2 gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm2 high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection. Applications: It is widely used
Welding Consumables
Characteristics: LKE-6013 is designed for high efficiency welding. Because of its thin flux coating the welding can be done with good slag removability, shallow penetration, less spatters and beautiful bead. Applications: It is suitable for welding of vehicles, steel sheets and other light structures. Notes on Usage: 1. Don’t exceed the range of proper current
Welding Consumables
Characteristics: Heat resistance, corrosion resistance and toughness of LKE-310 are good. The weld metal is a full austenite structure containing 25%Cr-20%Ni. It is not necessary to preheat and postweld heat treatment. Applications: It is suitable for the welding of dissimilar metals, low-temperature service stainless steel, mild steel and Cr-Mo steel. Notes on Usage: 1.Dry the
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a magnesium-alloyed aluminum. With good corrosion resistance when exposed to salt water. It is suitable for welding base metals 5050, 5052, 5083, 5356, 5454 and 5456. Classification: AWS A5.10 ER5356 Typical chemical composition of weld metal (wt%) Si Mn Mg Fe Al < 0.2 0.15 5.0 < 0.20
Welding Consumables
Characteristics: The weld metal of LKE-309L contains more Cr, Ni than LKE-308L. The microstructure containing suitable quantity of ferrite, gives it an excellent resistance to hot cracking. It is suitable for welding of dissimilar metals, hardening alloy steel and steel with poor weldability. Applications: It is suitable for welding of stainless steel piping in refineries
Welding Consumables
Characteristics: LKE-7016 is a low hydrogen type electrode for the welding of high tensile steel. The welding can be done with stable arc, less spatters, good slag removability, good slag covering and good X-ray soundness. Applications: It is suitable for low alloy steels, medium carbon steels, heavy steel plates, cast steels and steels of poor
Welding Consumables
Characteristics: It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 : ER4043 ASME SFA-5.10 : ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties
Welding Consumables
Characteristics: LKE-309MoL is a rutile electrode use as a buffer layer in welding acid resisting clad steels. With crack resistance and corrosion resistance at the high temperature due to higher Mo content. Applications: It is suitable for dissimilar metal welding of joining mild steel to stainless steel and steels difficult to weld. Notes on Usage:
