Anti-Spatter
Related products
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties of
Welding Consumables
Characteristics LKM-56 is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. It performs with smooth wire feeding, stable arc, low spatter loss and high deposition efficiency. Applications: It is suitable for welding of vehicles, ships, buildings and bridges. Classification: AWS A5.18 ER70S-6 JIS Z3312 YGW12 Typical
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a magnesium-alloyed aluminum. With good corrosion resistance when exposed to salt water. It is suitable for welding base metals 5050, 5052, 5083, 5356, 5454 and 5456. Classification: AWS A5.10 ER5356 Typical chemical composition of weld metal (wt%) Si Mn Mg Fe Al < 0.2 0.15 5.0 < 0.20
Welding Consumables
คุณสมบัติ It is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. LKT-50 is an all-position welding rod for TIG welding. It is especially suitable for the root pass of pipe welding. Use DC(-) polarity. Applications: It is suitable for welding of high pressure piping for shipbuilding,
Welding Consumables
Super Welding Crack Checker Liquid penetrant test is one of the most popular Nondestructive testing (NDT) methods in the industry. When compare with to other NDT methods. This methods is economical, versatile, and requires minimal training, Liquid penetrant test check for material flaws open to the surface This fluid(Penetrant) seeps into any defects such as
Welding Consumables
Characteristics: LKT-347 is a niobium-bearing rutile electrode for Ti and Nb stabilized 18Cr-8Ni steels. Good intergranular corrosion resistance and heat resistance can be obtained due to its Nb content.It is use for AISI 347, 321, 304L steels. Applications: It is suitable for welding of stainless steel piping, boiler and gas turbine. Notes on Usage: 1.Dry
Welding Consumables
Characteristics: LSF-38 is an active flux. It is designed for butt or fillet welding on sheet metal with nice bead appearance, porosity resistance and good slag removal. It is recommended for single pass welding steel plate under 25 mm thick. Applications: Typical applications include pressure vessels, H beam, pipe-mill application, shipbuilding and general steel structure.
