Ceramic Buck up Tap
Related products
Welding Consumables
Characteristics: LKT-347 is a niobium-bearing rutile electrode for Ti and Nb stabilized 18Cr-8Ni steels. Good intergranular corrosion resistance and heat resistance can be obtained due to its Nb content.It is use for AISI 347, 321, 304L steels. Applications: It is suitable for welding of stainless steel piping, boiler and gas turbine. Notes on Usage: 1.Dry
Welding Consumables
คุณสมบัติ It is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. LKT-50 is an all-position welding rod for TIG welding. It is especially suitable for the root pass of pipe welding. Use DC(-) polarity. Applications: It is suitable for welding of high pressure piping for shipbuilding,
Welding Consumables
Characteristics: LKE-6013 is designed for high efficiency welding. Because of its thin flux coating the welding can be done with good slag removability, shallow penetration, less spatters and beautiful bead. Applications: It is suitable for welding of vehicles, steel sheets and other light structures. Notes on Usage: 1. Don’t exceed the range of proper current
Welding Consumables
Characteristics: The weld metal of LKE-312 is a 29%Cr-9Ni% type stainless steel containing large content of ferrite which made it good crack resistance. Applications: It is excellent for the welding of dissimilar metals, cladding steel and steels with high hardenability. Notes on Usage: 1.Dry the electrodes at 200-250 °C for 60 minutes and keep at
Welding Consumables
Characteristics: LFC-711 is a flux-cored wire design to be use with CO2 gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm2 high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection. Applications: It is widely used
Welding Consumables
Characteristics: LKE-309MoL is a rutile electrode use as a buffer layer in welding acid resisting clad steels. With crack resistance and corrosion resistance at the high temperature due to higher Mo content. Applications: It is suitable for dissimilar metal welding of joining mild steel to stainless steel and steels difficult to weld. Notes on Usage:
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a magnesium-alloyed aluminum. With good corrosion resistance when exposed to salt water. It is suitable for welding base metals 5050, 5052, 5083, 5356, 5454 and 5456. Classification: AWS A5.10 ER5356 Typical chemical composition of weld metal (wt%) Si Mn Mg Fe Al < 0.2 0.15 5.0 < 0.20
Welding Consumables
Super Welding Crack Checker Liquid penetrant test is one of the most popular Nondestructive testing (NDT) methods in the industry. When compare with to other NDT methods. This methods is economical, versatile, and requires minimal training, Liquid penetrant test check for material flaws open to the surface This fluid(Penetrant) seeps into any defects such as
