Flux for Submerged arc welding
Related products
Welding Consumables
Characteristics: The weld metal of LKE-316L is a 18%Cr-12%Ni-2%Mo.It possesses properties to LKE-316 except with a much lower carbon content which reduces susceptibility to sensitization during welding. Applications: It is suitable for welding of AISI 316,316L and cladding stainless steel. Notes on Usage: 1.Dry the electrodes at 200-250°C for 60 minutes and keep at 100-150°C
Welding Consumables
คุณสมบัติ It is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. LKT-50 is an all-position welding rod for TIG welding. It is especially suitable for the root pass of pipe welding. Use DC(-) polarity. Applications: It is suitable for welding of high pressure piping for shipbuilding,
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a magnesium-alloyed aluminum. With good corrosion resistance when exposed to salt water. It is suitable for welding base metals 5050, 5052, 5083, 5356, 5454 and 5456. Classification: AWS A5.10 ER5356 Typical chemical composition of weld metal (wt%) Si Mn Mg Fe Al < 0.2 0.15 5.0 < 0.20
Welding Consumables
Characteristics: LKE-309MoL is a rutile electrode use as a buffer layer in welding acid resisting clad steels. With crack resistance and corrosion resistance at the high temperature due to higher Mo content. Applications: It is suitable for dissimilar metal welding of joining mild steel to stainless steel and steels difficult to weld. Notes on Usage:
Welding Consumables
Characteristics: The weld metal of LKE-308L is a rutile electrode for welding low carbon 18Cr-8Ni stainless steel. LKE-308L contains low carbon to avoid carbide precipitation during welding. Applications: It is suitable for welding of stainless steel piping in refinery, oil and gas industries, and chemical plants. Notes on Usage: 1.Dry the electrodes at 200-250°C for
Welding Consumables
Characteristics: LKE-2209 is a designed to weld duplex stainless steels. With excellent pitting corrosion resistance, stress corrosion resistance and crack resistance Applications: It is suitable for welding of chemical equipment, heat exchanger and pipes. Notes on Usage: 1.Dry the electrodes at 200-250°C for 60 minutes and keep at 100-150°C before use. 2.Use lower currents and
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties of
Welding Consumables
Super Welding Crack Checker Liquid penetrant test is one of the most popular Nondestructive testing (NDT) methods in the industry. When compare with to other NDT methods. This methods is economical, versatile, and requires minimal training, Liquid penetrant test check for material flaws open to the surface This fluid(Penetrant) seeps into any defects such as
