Anti-Spatter
Related products
Welding Consumables
Characteristics: LSF-38 is an active flux. It is designed for butt or fillet welding on sheet metal with nice bead appearance, porosity resistance and good slag removal. It is recommended for single pass welding steel plate under 25 mm thick. Applications: Typical applications include pressure vessels, H beam, pipe-mill application, shipbuilding and general steel structure.
Welding Consumables
Specification: High metal removal rate Excellent arc stability Low electrical resistant Uniform diameter Suitable for gouging on Steel, Stainless steel, Cast iron and Copper.
Welding Consumables
Characteristics: LFC-711 is a flux-cored wire design to be use with CO2 gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm2 high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection. Applications: It is widely used
Welding Consumables
Characteristics: The weld metal of LKE-308L is a rutile electrode for welding low carbon 18Cr-8Ni stainless steel. LKE-308L contains low carbon to avoid carbide precipitation during welding. Applications: It is suitable for welding of stainless steel piping in refinery, oil and gas industries, and chemical plants. Notes on Usage: 1.Dry the electrodes at 200-250°C for
Welding Consumables
Characteristics: It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 : ER4043 ASME SFA-5.10 : ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties
Welding Consumables
Characteristics: LKE-309MoL is a rutile electrode use as a buffer layer in welding acid resisting clad steels. With crack resistance and corrosion resistance at the high temperature due to higher Mo content. Applications: It is suitable for dissimilar metal welding of joining mild steel to stainless steel and steels difficult to weld. Notes on Usage:
Welding Consumables
Characteristics: The weld metal of LKE-316L is a 18%Cr-12%Ni-2%Mo.It possesses properties to LKE-316 except with a much lower carbon content which reduces susceptibility to sensitization during welding. Applications: It is suitable for welding of AISI 316,316L and cladding stainless steel. Notes on Usage: 1.Dry the electrodes at 200-250°C for 60 minutes and keep at 100-150°C
