Flux for Submerged arc welding
Related products
Welding Consumables
Characteristics: The weld metal of LKE-312 is a 29%Cr-9Ni% type stainless steel containing large content of ferrite which made it good crack resistance. Applications: It is excellent for the welding of dissimilar metals, cladding steel and steels with high hardenability. Notes on Usage: 1.Dry the electrodes at 200-250 °C for 60 minutes and keep at
Welding Consumables
Characteristics: LKE-2209 is a designed to weld duplex stainless steels. With excellent pitting corrosion resistance, stress corrosion resistance and crack resistance Applications: It is suitable for welding of chemical equipment, heat exchanger and pipes. Notes on Usage: 1.Dry the electrodes at 200-250°C for 60 minutes and keep at 100-150°C before use. 2.Use lower currents and
Welding Consumables
Characteristics: LINKWELD MIG Aluminium Wires It is a silicon-alloyed aluminum. It is suitable for welding base metal 3003, 3004, 5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. Classification: AWS A5.10 ER4043 Typical chemical composition of weld metal (wt%) Si Mn Zn Fe Al 5.0 0.02 0.05 0.20 Bal Typical mechanical properties of
Welding Consumables
Characteristics LKM-56 is designed for welding of mild steel and 490N/mm2 grade steel. Commonly used is butt or fillet welding. It performs with smooth wire feeding, stable arc, low spatter loss and high deposition efficiency. Applications: It is suitable for welding of vehicles, ships, buildings and bridges. Classification: AWS A5.18 ER70S-6 JIS Z3312 YGW12 Typical
Welding Consumables
Feature • It’s effective prevent welding splash from blocking nozzle. • Extends life of nozzle and contact tip. • Make welding result better. • Odorless. How to use Prevent nozzle clogging from welding splash, welding performance improved and maintenance nozzle prolongs the service life. Suitable for Dip the hot nozzle into the gel, when exposed
Welding Consumables
Characteristics: LFC-711 is a flux-cored wire design to be use with CO2 gas. It can be used on all-position welding with both single and multiple pass welds on mild steels and 490N/mm2 high tensile steel. With good impact toughness, less fume, stable arc, easy slag removal and excellent X-Ray inspection. Applications: It is widely used
