(Flux Cored Stainless Wire)
▶︎ Characteristics:
LFC-312 is designed for welding of high carbon steels and for the first layer cladding of carbon and low alloy steels. The best results are obtainable when the buttering technique is used.
▶︎ Applications:
It is suitable for welding buttering and cladding of austenitic steels types 303, 416, 430F
▶︎ Notes on Usage:
1. Use 100% CO₂ shielding gas.
2. Keep dry while in storage and delivery.
3. Trailer Shield is required to ensure the weld pool completely shield until solidification is complete and no porosity problem.
▶︎ Classification:
AWS A5.22 E312T1-1
JIS Z3323 : TS312-FB1
▶︎ Welding Position:
▶︎ Typical chemical composition of weld metal (wt%)
| C | Mn | Si | P | S | Cr | Ni | Mo | Cr |
| 0.05 | 1.23 | 0.66 | 0.025 | 0.008 | 28.30 | 9.60 | 0.06 | 0.08 |
▶︎ Typical mechanical properties of weld metal
| TS N/mm2 | EL % |
| 780 | 30 |
▶︎ Sizes and recommended current range (DC+)
| Diameter (mm) | 1.2 | |||
| Welding Position |
F, HF | H | V-UP | OH |
| Voltage(Volt) | 24-33 | 25-29 | 24-28 | 25-29 |
| Current(Amp) | 130-220 | 140-180 | 130-160 | 150-180 |
| Stick out(mm) | 15-20 | 15-20 | 15-20 | 15-20 |
| Flow rate(l/min) | 20-25 | 20-25 | 20-25 | 20-25 |
| Weight per spool(kg) | 12.5 | |||
